2060 Cartridge: 3500 Independent Transfer Valves

Last updated
Save as PDF

This article will provide instructions on how to replace a 2060 cartridge in a 3500 Five Function Transfer valve.

Preparation:

The water supply shut off valves must be turned off- see article How to Turn Off the Water Supply to the Faucet.
Recommended Tools: Pliers or Wrench
The following instructions assume the handle and associated handle pieces have been removed. For additional details, visit solutions.moen.com and select the type you are repairing. The faucet guide will contain specific information on handle assemblies associated with that style of product.

2060 Cartridge:

Step 1

Position the pliers or a wrench on the flat sides of the cartridge nut and rotate counter-clockwise to remove the cartridge nut.

Step 2

Slide the cartridge out of the brass valve body.

Step 3

Position the new cartridge so the two feet on the bottom of the cartridge line up with the two matching indents inside the valve body. Slide the cartridge into the valve body.

Step 4

Slide the cartridge nut into the valve body and position the pliers or wrench on the flat sides of the cartridge nut. Rotate the cartridge nut clockwise until it is tight, then rotate it an additional 1/8 turn.

Step 5

Use the pliers or wrench to rotate the brass cartridge stem so that the flat side with the round indent is facing upward.

For additional information on Moen products visit solutions.moen.com and select the type of product you are repairing. The guide will contain repair details, troubleshooting and specific information on assembling handles associated with that style of product.

Still Not Finding What You're Looking For?

Non US? Moen Canada | Other International Sites