Skip to main content
Moen Solutions

How do I clean the screen filter in the control box?

Verify your faucet by identifying the control box under your sink

Snag_f7920f3.png

Turn off the water supply lines and remove the filter plug from the bottom of the control box using a flat-bladed screwdriver. Rinse debris from the screen, then reinstall. To clean the screen on hose "2" follow hose removal instructions here. Once removed, use two wrenches on the flat surfaces to separate the brass filter housing. Rinse screen of any debris and reassemble. When reinstalling the hose, confirm it is in place by giving a slight pull.

Snag_f7933cf.png

Hose removal and cleaning of the filter screens can be found in the troubleshooting section of the instruction guide found here