Skip to main content

 

Moen Solutions

My rough-in valve in the shower was installed too far back from my finished wall. Can I get an extension kit to correct this?

Yes. The extension kit number will be dependent on the type of valve that is installed, as well as the finish of the trim. Below is a list out service kit numbers and descriptions for some of these extensions kits that are available.

 
Service Kit Number
Description/Color-Finish
PosiTemp
96945 1" Extension / Chrome
96945BN 1" Extension / Brushed Nickel
96858 1" Extension / Polished Brass
96945PM 1" Extension / Platinum or Satine
96945WR 1" Extension / Wrought Iron
96955 2" Extension / Chrome
96868 2" Extension / Polished Brass
Moentrol
137347 1" Extension / Chrome
137347NL 1" Extension / Polished Nickel
137347P 1" Extension / Polished Brass
137347BN 1" Extension / Brushed Nickel
137347WR 1" Extension / Wrought Iron
Single Handle Standard Tub/Shower 
10399 1" Extension / Chrome
Moentrol  2 or 3 Function Transfer Valve (3320, 3330 or 3350)
110317 (Prior to July  2007) 1" Extension / Chrome
135167 ( After July 2007) 1" Extension / Chrome
135167BN  ( After July 2007) 1" Extension / Brushed Nickel
135167WR ( After July 2007) 1" Extension / Wrought Iron or Oil Rubbed Bronze
3/4" Exact Temp Thermostatic Valve (3371 or S3371)
130143 (Prior to July  2009) 1" Extension 
147206 (After July 2009) 1" Extension 
3/4" Exact Temp Volume Control Valve (3600 or S3600)
130155 (Prior to July 2009) 1" Extension 
147212 (After July 2009)  1" Extension 
Transfer Valve (3372 or 3375)
148479 1" Extension / Chrome
148479BN 1" Extension / Brushed Nickel
148479WR 1" Extension / Wrought Iron or Oil Rubbed Bronze
Transfer Valve (3362)
193114 1" Extension 
 

 

  • Was this article helpful?