Skip to main content


Moen Solutions

How do I uninstall the hoses for inline filter cleaning?


Verify your faucet by identifying the control box under your sink

faq motionsense 1.png

Only hoses numbered 1 through 4 can be removed from the control box. The two hoses coming from the base of the control box are permanently attached.

faq motionsense 2.png

With the water supplies turned off, verify that the water is off by operating the faucet. The hose can then be removed from the control box by pushing up on retaining ring and pulling down on supply hose. This can also be seen in the troubleshooting guide


  • Was this article helpful?