Skip to main content

 

Moen Solutions

MS3-MS6-How Do I Clean The Filters On My Faucet?

 

 

 To proceed with this repair you must shut off the water source that supply this faucet.  For details see How To Shut Off The Water Supply

Dual Sensor Models Built Prior to 2015
  • To remove the filter from hose number 2, hold the gray ring down that's located on the gray control box where the hose goes into it and pull out on the hose. 

  • The filter will be located in the brass portion of hose number 2 which can be unthreaded with a wrench to be accessed. Click here for an image.

  • The housing for the lower filter, located on the underside of the control box, will unthread using a flat head screw driver. Click here for an image. The filter will come out as the brass housing unthreads.

And
Single Sensor Models Built 2018-Present    
  • The filters are located in the hot and cold supply lines that come down from the black control box. Click here for an image.

  • To remove the hot and cold supply lines from the control box, hold the grey ring down that's located on the black control box where the hose goes into it and pull out on the hose. Click here for an image of the grey ring.

  • The filter will be located in the brass portion of the hot and cold supply lines which can be unthreaded with a wrench to be accessed. Click here for an image.

gray line 2.png
 

  call1800.png