Skip to main content
Moen Solutions

K11-High Arc Spout O-Ring Replacement

  1. Unscrew Spout nut counter-clockwise.
    O-ring replacement1.jpg
  2. Pull Spout assembly tube up and off of valve body
    O-ring replacement2.jpg
  3. Remove old black rubber o-ring and white nylon washer
    O-ring replacement3.jpg
  4. From repair kit, lubricate black rubber O-ring with grease provided
    O-ring replacement.jpg
  5. Place nylon washer in upper channel and O-ring in lower
    O-ring replacement4.jpg
  6. Insert Spout and push firmly until white nylon washer hits against brass valve body
    O-ring replacement5.jpg
  7. Tighten Spout nut clockwise until tight
  • Was this article helpful?