Skip to main content

 

Moen Solutions

K28-Pullout Written Handle Mech

INSTRUCTIONS FOR SERVICE KIT #100440

k28 image 1.png

Medora

Single Handle High Arc Kitchen Faucet

With Pulldown Spray

7599

k28 image 2.png

Camerist

Single Control Kitchen Faucet

With Pullout Spray

7545

k28 image 3.png

Triana

Single Control Kitchen Faucet

With Pulldown Spray

87555

 

k28 image 4.png

Renzo

Single Control Kitchen Faucet

With Pullout Spray

87316

k28 image 6.png

Extensa

Single Control Kitchen Faucet 

With Pullout Spray

7560

k28 image 7.png

Salora

Single Control Kitchen Faucet

with Pullout Spray

7570 and 87570

k28 image 8.png

Caprillo

Single Control Kitchen Faucet

With Pullout Spray

87550

k28 image 9.png

Colonnade

Single Control Kitchen Faucet

With Pullout Spray

7575 and 87575

k28 image 10.png

PureTouch

Single Control Kitchen Faucet

With Water Filter And Pullout Spray

7850

k28 image 11.png

Extensa

Single Control Kitchen Faucet

With Pullout Spray

7580

100440 

For Models: 7850, 7560

k28.png

1- Handle*
2- Handle Screw: Unscrew counter clockwise with a 7/64" hex wrench
3- Plug Button: Remove by pulling out
4- Dome* & Black Plastic Pivot Retainer Nut: Pull off dome from pivot retainer nut. Unscrew black plastic pivot retainer nut counter clockwise
5- Cartridge Screw: Unscrew counter clockwise with Phillips screwdriver
6- Handle Adapter*: Lift handle adapter and handle connector off cartridge stem
7- Handle Adapter Connector*
8- White Pivot Stop Used with 7560 Extensa: Remove white pivot stop
9- Double D Washer: Lift off double D washer
10- Black Plastic Retainer Nut: Unscrew counter clockwis
11- Metal Wavy Washer: Lift off metal wavy washer and black plastic split bearing washer
12- Black Bearing Washer
Helpful Hints for Service Kits #100440, 93980 And 100429
  • Remove Dome From Pivot Retainer Nut before removal or replacement

k28 helpful hints image 1.png

  • To prevent cross threading, rotate all plastic parts in reverse (counter clockwise) to feel a "click" before tightening (clockwise)

k28 helpful hints image 2.png

  • Position Pivot Stop with tallest side towards front of faucet facing up

k28 pivot stop.png

  • Position Handle Adapter with tallest side towards the front of faucet, tilt the top back when attaching dome and handle

k28 adapter.png

  • If the hex opening of the Handle Screw becomes stripped, a T-15 Torx can be used to remove the screw

k28 helpful hints image 5.png

  • To insure that the hot is on the left and the cold is on the right, position the stem of the cartridge with the notch and the vent hole facing forward and the numbers facing rear.

k28 helpful hints image 6.png

 

  • Was this article helpful?