How do I pair my Smart Wireless Soil Sensor?

If your Smart Wireless Soil Sensor(s) is not paring with the Smart Sprinkler Controller, it may be necessary to reset it back to the factory default settings. In order to do this, please follow the steps below: 

1. Ensure the controller LED is solid green before resetting the sensor. If it's not, wait until it turns solid green.
2. Remove the front cover from the Smart Sprinkler Controller and locate the silver magnets on the back side 
3. Take the Smart Wireless Soil Sensor and with the Moen logo facing away from you, place the left corner on top of the magnet for at least 25 seconds 
4. Remove it from the magnet and then open the Moen Smart Water Network application and tap the Smart Sprinkler Controller icon to access the Overview page 
5. Navigate to the Sensors tab and tap the Add Soil Sensor button 
6. Tap the Continue button and wait for the tune to sound from the Smart Sprinkler Controller 
7. Take the Smart Wireless Soil Sensor with the Moen logo facing away from you, place the left corner on top of the magnet, and wait for a green light on the Smart Sprinkler Controller 
8. A second tune will sound and a Success message displays within the application. 
9. You can edit the default Soil Sensor Name if you choose to 
10. Tap the Finish button to return to the Sensors page with the Soil Sensor displaying