Skip to main content
Moen Solutions

What do the LED lights and beeps mean?

 

Status LED Light Color and/or Audible Tone Probable Cause(s) Recommended Action(s)
LED is blinking Amber and Blue The device is broadcasting a network in an attempt to configure with your mobile device. None.
LED is solid Green Device connected to your network. None.
LED is solid Yellow Device is not able to connect with your network. Check network connection.
LED is blinking Yellow (half a second on, then 9 and a half seconds off) Device is running on battery power. Check main power source.

LED is blinking Yellow: 1 second on, then 4 seconds off.

Beeper: Beeps in a low pitch tone for 0.5 second, then off for 600 seconds

Battery power low. Replace battery when convenient.

LED is blinking Yellow: 1 second on, then 1 second off.

Beeper: Beeps in a low pitch tone for 0.5 second, then off for 600 seconds

Battery dead. Replace battery to ensure proper operation.
LED is Blinking White The device is in the process of upgrading to the latest software. None.

LED is blinking Red, half second on, then half second off.

Beep is constant.

Water in the sump basin is above overflow water level or water detected by leak sensor. Take immediate action.

LED is blinking Red, half second on, then half second off.

Beeper: Beeps in a high pitch tone for 0.5 second, then off for 3 seconds

Water in the sump basin is above high water level. If a battery back up sump pump is installed, the backup should be running. If not, take immediate action.
LED is blinking Red, 1 second on, then 1 second off. Failed to read water level from smart water level sensor. Check connection.
     
     

 

  • Was this article helpful?