What do the LED lights and beeps mean?
| Status LED Light Color and/or Audible Tone | Probable Cause(s) | Recommended Action(s) |
|---|---|---|
| LED is blinking Amber and Blue | The device is broadcasting a network in an attempt to configure with your mobile device. | None. |
| LED is solid Green | Device connected to your network. | None. |
| LED is solid Yellow | Device is not able to connect with your network. | Check network connection. |
| LED is blinking Yellow (half a second on, then 9 and a half seconds off) | Device is running on battery power. | Check main power source. |
|
LED is blinking Yellow: 1 second on, then 4 seconds off. Beeper: Beeps in a low pitch tone for 0.5 second, then off for 600 seconds |
Battery power low. | Replace battery when convenient. |
|
LED is blinking Yellow: 1 second on, then 1 second off. Beeper: Beeps in a low pitch tone for 0.5 second, then off for 600 seconds |
Battery dead. | Replace battery to ensure proper operation. |
| LED is Blinking White | The device is in the process of upgrading to the latest software. | None. |
|
LED is blinking Red, half second on, then half second off. Beep is constant. |
Water in the sump basin is above overflow water level or water detected by leak sensor. | Take immediate action. |
|
LED is blinking Red, half second on, then half second off. Beeper: Beeps in a high pitch tone for 0.5 second, then off for 3 seconds |
Water in the sump basin is above high water level. | If a battery back up sump pump is installed, the backup should be running. If not, take immediate action. |
| LED is blinking Red, 1 second on, then 1 second off. | Failed to read water level from smart water level sensor. | Check connection. |