Skip to main content
Moen Solutions

Sump Pump Monitor Status LED, Beeper and Siren

Status LED Description Meaning
Snag_252909e4.png

Status LED is solid Yellow.

Device is not able to connect with your network.

Snag_25299f0f.png

Status LED is solid Green.

Device connected to your network.

Snag_2529f230.png

Status LED is blinking Yellow: half a second on, then 9 and a half seconds off.  

Beeper: Beeps in a low pitch tone for 2 seconds once.

Device is running on battery power. Check main power source.

Snag_252a15a6.png

Status LED is blinking Yellow: 1 second on, then 4 seconds off. 

Beeper: Beeps in a low pitch tone for 0.5 second, then off for 600 seconds 

Battery power low. Replace battery when convenient

Snag_252a4707.png

Status LED is blinking Yellow: 1 second on, then 1 second off. 

Beeper: Beeps in a low pitch tone for 0.5 second, then off for 600 seconds 

Battery dead. Replace battery to ensure proper operation.

Snag_252aa6ea.png

Status LED is blinking Amber and Blue.

The device is broadcasting a network in an attempt to configure with your mobile device. 

Snag_252b3407.png

Status LED is blinking White.

The device is in the process of upgrading to the latest software. 

clipboard_ec7591569901946427dd26c78957a8307.png

Status LED is blinking Red, half second on, then half second off.

Siren stays on.

Water in the sump crock is above overflow water level or water detected by leak sensor. Take immediate action.

Snag_25369ea2.png

Status LED is blinking Red, half second on, then half second off.

Beeper: Beeps in a high pitch tone for 0.5 second, then off for 3 seconds 

Water in the sump crock is above high water level. Backup should be running.

Snag_2536e495.png

Status LED is blinking Red, 1 second on, then 1 second off.

Failed to read water level from sensor. Check connection.

     

 

  • Was this article helpful?