Flo Smart Water Monitor and Shutoff Lithium Ion Battery Backup
How to install the Flo Smart Water Monitor and Shutoff Lithium Ion Battery Backup?
To install, simply plug the Flo Smart Water Monitor and Shutoff device into the battery backup and plug the battery backup into the Flo AC power supply. No pairing or additional setup is needed.
- Operating temperature: Battery Backup must not be installed where the ambient temperature can exceed 113°F (45°C) or below 32°F (0°C)
- Rated for Indoor use only. Battery Backup SHOULD NOT be installed outdoors or in places exposed to direct sunlight and not to be installed in poorly ventilated locations.
How long does the Lithium-Ion Battery Backup power the Flo Smart Water Monitor & Shutoff if there is no power?
The Lithium-Ion Battery Backup for Flo Smart Water Monitor and Shutoff devices powers your Flo Smart Water Monitor & Shutoff device up to 4 hours without power.
How long does it take to charge the Battery Backup?
It takes 5 to 6.5 hours to fully charge the Flo Smart Water Monitor and Shutoff Lithium Ion Battery Backup under standard conditions.
Status LED
- Solid Green = Full charge, AC Power Adapter Present
- Blinking Green = Charging Battery Backup
- Blinking Red = No AC Power, Operating as Battery Backup
- Solid Red = Battery depleted, needs to be charged and/or error
For more information, download the specifications below: