14960 Diverter Kit- Installing in a Waterhill Kitchen Faucet

Last updated
Save as PDF

This article will explain the process of replacing the 14960 service kit.

Preparation:

The water supply shut off valves must be turned off- see article How to Turn Off the Water Supply to the Faucet.
Recommended Tools: Diverter Bolt (supplied in the 14960 Diverter Kit), Phillips Screwdriver, Adjustable Wrench

Disassembly:

1. Unscrew the Spout Cap (#1).

2. Remove the Spout Cap (#1). 3. Remove Upper the Bearing (#2)

3 .Pull straight up to remove Spout (#3) from Hub Assembly (#4).

4. Use a screwdriver to loosen the Hub Assembly (#4). Remove the Hub Assembly (#4) from Valve.

5. Insert the Bolt into Old Diverter (#6). Grip the Bolt with pliers, rotate to loosen the Old Diverter (#6).

Assembly:

1. Place the O-ring (#6) onto the base of the diverter (#5).

2. Tighten the Diverter (#6) with Bolt by hand.

3.Slide the Hub Assembly (#4) onto Valve. Tighten the Hub Assembly (#4) by hand. Using a screwdriver, tighten the Hub Assembly (M) 1/8 of a turn. Do not over-tighten.

4. Push the spout (#3) straight down onto the hub assembly (#4). Install the upper bearing washer (#2) onto the spout and thread the spout cap (#1) back on.

For additional information on Moen products visit solutions.moen.com and select the type of product you are repairing. The guide will contain repair details, troubleshooting and specific information on assembling handles associated with that style of product.

Still Not Finding What You're Looking For?

Non US? Moen Canada | Other International Sites