Skip to main content
Moen Solutions

14960 or 100255 Diverter Service Kit

Installation instructions for a kitchen faucet diverter kit 14960 or 100255.


High-Arc Spout:

2h kitchen high arc 14960.png


Low-Arc Spout:

2h 14960 diverter.png




High Arc

1. Loosen the Spout Hub (#2). Slide the Spout Hub (#2) up on Spout (#1) and pull straight up to remove the Spout & Spout Hub from Valve.

Low Arc

1. Unscrew the Spout Cap (#2) and Remove the Spout Cap (#2).


2. Insert the Bolt into the Old Diverter (#3). Grip the Bolt with pliers, rotate to loosen the Old Diverter (#3). Remove the Old Diverter (#3) and the Old O-ring.


Place the O-ring onto base of the Diverter (#3). Using the Bolt, insert the Diverter (#3) into Valve. Tighten the Diverter (#3) with the Bolt by hand.

High-Arc Spout

Replace the Spout (#1) & the Spout Hub (#2) onto Valve. Ensure the Spout is fully engaged. Tighten the Spout (#1) with the Spout Hub (#2)

Low Arc Spout:

Install the Spout Cap (#3) onto the Valve.

For additional information on Moen products visit and select the type of product you are repairing. The guide will contain repair details, troubleshooting and specific information on assembling handles associated with that style of product.

Still Not Finding What You're Looking For?

Contact Us or Call 1-800-BUY-MOEN           

Non US?  Moen Canada | Other International Sites  

  • Was this article helpful?