160657 Cartridge: Single Handle 4" Centerset Sidemount Lever

Last updated
Save as PDF

This article will explain the process of replacing the internal water flow cartridge in a sidemount lever handle lavatory faucet. The information will include details about the tools needed and the method of removing the cartridge.

Preparation:

The water supply shut off valves must be turned off- see article How to Turn Off the Water Supply to the Faucet.
Recommended Tools: Pliers
The following instructions assume the handle and associated handle pieces have been removed. For additional details, visit solutions.moen.com and select the type you are repairing. The faucet guide will contain specific information on handle assemblies associated with that style of product.

sidemount handle cartridge breakdown.png

Disassembly:

Use an adjustable wrench to unthread and remove the black retainer nut (#1).
To remove the cartridge (#2), pull up on stainless steel stem.

It is recommended to clean and flush the valve body (#3) prior to installing the new cartridge (#2). See article Valve Body Cleaning and Flushing for additional details

Assembly:

The new cartridge (#2) will only fit in the valve body (#3) one way. Line up the three vertical ribs on the cartridge (#2) with the three vertical grooves in the valve body (#3) and insert the cartridge (#2).
Tighten the black retainer nut (#1) by hand until tight, then using pliers, rotate an additional 90° (1/4 turn) with a wrench.

For additional information on Moen products visit solutions.moen.com and select the type of product you are repairing. The guide will contain repair details, troubleshooting and specific information on assembling handles associated with that style of product.

Still Not Finding What You're Looking For?

Non US? Moen Canada | Other International Sites