Skip to main content
Moen Solutions

91192 Diverter Kit

  1. Last updated
  2. Save as PDF

 

This article will provide step-by-step instructions for replacing this service kit.

Preparation:

  • The water supply shut off valves must be turned off- see article How to Turn Off the Water Supply to the Faucet.
  • Recommended Tools: Soft Bristle Brush
  • The following instructions assume the handle and associated handle pieces have been removed. For additional details, visit solutions.moen.com and select the type of faucet you are repairing. The faucet guide will contain specific information on the handle assemblies associated with that style of product.

Do not remove the cartridge clip or the cartridge for this repair.

91192.png

When installing the diverter, the wider end of the diverter faces downward.

  1. Pull the spout (#1) upward to remove. Note: It is recommended to use a soft bristle brush to clean the inside of the spout (#1) to remove any debris.
  2. Slide the diverter (#2) up to remove.
  3. Gently slide the new diverter (#2) over the O-rings (#3).
  4. Slide the spout (#1) on so that it meets up against the escutcheon plate (#4).

For additional information on reassembling the handle, visit solutions.moen.com and select the type you are repairing. The faucet guide will contain specific information on handle assemblies associated with that style of product.  

For additional information on Moen products visit solutions.moen.com and select the type of product you are repairing. The guide will contain repair details, troubleshooting and specific information on assembling handles associated with that style of product.

Still Not Finding What You're Looking For?

Contact Us or Call 1-800-BUY-MOEN           

Non US?  Moen Canada | Other International Sites