Skip to main content
Moen Solutions

96778 Spout O-Rings for Two Handle Kitchen Faucet with Escutcheon

This article will explain how to replace spout o-rings in a two handle kitchen faucet with a low arc spout.


Preparation:

clipboard_e368f72e92b471f1124bda191f60085d9.png

1. Unthread the spout cap (#1) from the faucet.

2. Lift the spout (#2) off of the faucet.

3. Match the corresponding spout O-rings (#3) on the valve body with a spout O-ring from the parts kit. The 96778 kit comes with 2 small and 1 lager O-ring and a pack of silicone lubricate.

4. Use a flathead screwdriver to gently pull each spout O-ring off from their respective groove in the valve body. (We recommend using a soft tip marker to mark where the original spout O-ring was removed from for proper placement of the new spout O-ring.)

5. Apply a thin layer from the supplied pack of silicone lubricate to each rubber spout O-ring.

6. Slide each spout O-ring onto the valve body and into the correct groove. (The lower spout O-ring does not go over the holes in the valve body.

For a comprehensive faucet guide, visit solutions.moen.com and select the type of faucet you are repairing. The faucet guide will contain specific information associated with that style of product.  


Still Not Finding What You're Looking For?

Contact Us or Call 1-800-BUY-MOEN           

Non US?  Moen Canada | Other International Sites