Skip to main content
Moen Solutions

Assembling an Adapter and Connector

This article will provide step-by-step instructions for attaching the connector to the adapter.

If installing a service kit P/N 93980 or 100429, the metal adapter and the black plastic connector are packaged as separate pieces. These two pieces must be combined for the faucet handle to operate properly.

Snap the black plastic connector over the horizontal bar at the bottom of the metal adapter. Make sure that the smaller hole (A) on the black plastic connector faces up and the larger hole (B) faces down (see Figure A Below). 



  Figure A


For additional information on Moen products visit and select the type of product you are repairing. The guide will contain repair details, troubleshooting and specific information on assembling handles associated with that style of product.

Still Not Finding What You're Looking For?

Contact Us or Call 1-800-BUY-MOEN           

Non US?  Moen Canada | Other International Sites