How to Identify and Replace a Lift Rod Diverter

Last updated
Save as PDF

There are different diverter lift rods that Moen Roman Tub faucets use. This article will explain how to remove the diverter and what the key identifiers are for which diverter you are working with.

Preparation:

The water supply shut off valves must be turned off- see article How to Turn Off the Water Supply to the Faucet.
Recommended Tools: 5/32" Hex Wrench, Diverter Tool (See chart below)

To Access the Diverter

How to Remove the Spout & Diverter:

Unthread the diverter lift rod (#1) and remove it from the spout (#4).
Carefully pull out the plug button (#2). Using a 5/32" Hex wrench, unthread the spout screw (#3) (the spout screw (#3) needs to be removed completely) and lift the spout (#4) from the deck.
Use the diverter tool to loosen the lower diverter nut.
Pull the diverter out from the valve

To Install the Diverter & Spout:

Follow Steps in reverse order.

Identifying the Lift Rod Diverter

Diverter Number	Diverter Tool	Length	Plunger	Diverter Nut
101951 (tool included)	141003 (tool only)	6"	Red	Brass
140325 (tool included)	141003 (tool only)	7"	Red	White Plastic
161772 (tool not included)	161773 (tool only)	6"	Black	Brass

For a comprehensive guide, visit solutions.moen.com and select the type of product you are repairing. The guide will contain specific information associated with that style of product.

Still Not Finding What You're Looking For?

Non US? Moen Canada | Other International Sites