Skip to main content
Moen Solutions

Kitchen Faucet 3-in-1 Water Filtration: Low Flow

  1. Last updated
  2. Save as PDF
The screen of the Y-Connector contains an internal screen that gathers debris and can become blocked causing a low flow situation. The information will provide detailed instructions on how to clean the screen.
 

Preparation:

clipboard_e37098fea549f588d0afe8e70b936092e.png

Using Needle Nose Pliers gently pull the Fitting out from the Y-Connector (L). Next, remove the Screen and then insert it into a cup of water. Agitate the Screen by hand for 15 seconds then drain excess water from it.

clipboard_ee3403f681c7f9199909f7355e7652adc.png

Place the Screen into the Y-Connector (L).

Reinstall by Firmly pushing the Fitting Adapter back into the Y-Connector (L). Note: The screen must be reinstalled to prevent leaking.

Turn the water supply shut off valve back on. Turn the faucet on and check for any leaks.

For additional information on Moen's Water Filtration Products, visit 3-IN-1 Water Filtration Pulldown Kitchen Faucets at Solutions.moen.com.

Still Not Finding What You're Looking For?

Contact Us or Call 1-800-BUY-MOEN

Non US? Moen Canada | Other International Sites