Skip to main content
Moen Solutions

Sidespray Service Kit- Sidemount Handle Faucet

This article explain the process of installing a side spray kit.


Preparation: The water supply shut off valves must be turned off- see article How to Turn Off the Water Supply to the Faucet.


To Disconnect To Connect

Remove the side spray hose from the diverter at the point of the red arrow.

Black Connector

clipboard_ef0b509d00272145acd0e59e69cf69d8a.png

Squeeze the white tabs together and push the tabs in. Pull the hose from the quick connect.  

White Connector

clipboard_eeb99f0469a7f9cbf2f91c032772cc4f5.png

Press and hold the black button while pulling the hose out from the quick connect. 

 1. Remove the protective cap from the side spray hose.

1. To install the Side Spray hose into the diverter. Push it in as far as possible until a “click” is heard. Note: The Black & White Connectors are interchangeable.

2. Tug downward to test engagement.

 


For additional information on Moen products visit solutions.moen.com and select the type of product you are repairing. The guide will contain repair details, troubleshooting and specific information on assembling handles associated with that style of product.


Still Not Finding What You're Looking For?

Contact Us or Call 1-800-BUY-MOEN           

Non US?  Moen Canada | Other International Sites  

  • Was this article helpful?