Skip to main content
Moen Solutions

Tub and Shower Drains

How to identify the different types and models of Moen tub and shower drains through pictures and operation. This article will also explain what size tubs the drains are used on if applicable.

How To Tell If My Drain Assembly Is Moen

Moen tub drains are sold separate (not included with tub/shower valves or trim). Roman tubs and standard tubs often include a drain assembly. Consult your Roman tub or tub specification sheet or owners manual to see if it came with the assembly. All Moen cover plates are round with either one or two screw holes. On some models, the word "Moen" is on the outer edge of the cover plate.

Warranty

The warranty on Moen tub and shower drains is:

Prior to 2008-One Year Limited Warranty.

After late 2008- Lifetime Limited Warranty.

Tub And Shower Drain Assemblies:
Trip Lever

trip lever drain.png

The lever on the overflow plate opens and closes the drain.

Replacement:

90410- Brass-Fits 14"-16" tubs 

90480- Brass-Fits 16"-24" tubs 

  • Click here for Parts Page
  • Tubing not sold separately                                                              
Push and Lock

push and lock drain.png

Pull up on the knob to open (drain the water).

Push down on the knob to close (fill the tub).

Replacement:

T90331

  • Click here for Parts Page                                                                            
Lift-N-Drain

lift n drain.png

Pull up and rotate the knob to open (drain the water).

Rotate and push down on the  knob to close (fill the tub).

Replacement:

90530- PVC (chrome only-tubing not sold separately) or

T90331- Push and Lock

Touch Drain

touch drain.png

Push down on the drain to open (drain the water).

Push down on the drain to close (fill the tub).

Replacement:

Obsolete, replace with T90331

 

Shower Drain Covers:
4" Screwed-In Shower Cover

4 inch screwed in shower cover.png

102763

  • Moen located in the center of shower drain cover.
  • Screws are 3-3/8" apart on center.
  • Screws are included.
4-1/4" Screwed-In Shower Cover

4 1.4 screwed in shower cover.png

101664

  • Moen located on outer edge of shower drain cover.
  • Screws are 2-5/8" apart on center.
  • Screws are included.
4-1/4" Snap-In Shower Cover

4 1.4 snap in shower cover.png

101663

  • Moen located on outer edge of shower drain cover.
  • Fits in 3" diameter drains.
  • Snaps into drain.

Click here to see article, Faucet Finishes.


For additional information on Moen products visit solutions.moen.com and select the type of product you are repairing. The guide will contain repair details, troubleshooting and specific information on assembling handles associated with that style of product.


Still Not Finding What You're Looking For?

Contact Us or Call 1-800-BUY-MOEN           

Non US?  Moen Canada | Other International Sites  

  • Was this article helpful?