How To Customize Your MicroLeak Test
What Can I Customize?
When it Runs
The MicroLeak Test (Health Test) is automatically scheduled to run when you are least likely to use water. We recommend allowing the Flo Smart Water Monitor and Shutoff to learn what the best time to run your MicroLeak Test is within the 24-hour range and run it automatically for you. Still, you have the option to limit the time range for when the Automatic MicroLeak Test will run, and your Flo Smart Water Monitor and Shutoff will learn what the best run time is within that specified range.
For example: If your Flo Smart Water Monitor and Shutoff is installed right outside your bedroom window and the opening and closing of the valve wakes you up when you are sleeping at night, you can shorten the time range for the test to only run during the day from 8am to 8pm. The wider the range, the more opportunities you are giving your Flo Smart Water Monitor and Shutoff to learn what the best time is to run the Automatic MicroLeak Test.
The Automatic MicroLeak Test schedule is specific to each device, so please keep in mind that if you have more than one Flo Smart Water Monitor and Shutoff, the automatic run time may differ, and any manual changes made to one Automatic MicroLeak Test schedule will not be carried over to another device.
If the Automatic MicroLeak Test is disabled, your product warranty and FloProtect deductible (if you have a FloProtect subscription) may be void.
How Many Times It Runs
By default, the MicroLeak Test will run once per day. You can customize your MicroLeak Test settings to allow up to three daily MicroLeak tests. This will add more protection by testing your home for leaks more often. The more often your Flo Smart Water Monitor and Shutoff tests your home for leaks, the sooner it can alert you if there is one. This is also beneficial for larger homes with more plumbing and higher water usage.
How Do I Customize my Automatic MicroLeak Test?
You can customize your MicroLeak Test settings in the App. You cannot customize your MicroLeak/Health Test user.meetflo.com.
The Flo by Moen App is being sunsetted. All current users will eventually be migrated to the Moen Smart Water Network App.
Customize a MicroLeak/Health Test in the App
Please note, most users are on the Moen Smart Water Network App. The Flo by Moen App is being sunsetted. Moen will contact current users when it is their time to convert to the Moen Smart Water Network App.
| Moen Smart Water Network App | Flo by Moen App |
|---|---|
|
pen up the app and tap on your Flo Shutoff device
|
Open the app and tap on the device you want to adjust the settings on. |
|
Tap the Settings tab |
At the top right of the screen, select Device Settings.
|
|
Under ‘Settings’ scroll down until you see MicroLeak Test. Tap MicroLeak Test.
|
Under ‘Advanced Features’ Select Health Test
|
|
Adjust any of the following settings you would like:
When you have adjusted your settings, tap Save Settings:
|
Adjust any of the following settings you would like:
|
