Skip to main content
Moen Solutions

100000 and 101879 Spout O-Ring

  1. Last updated
  2. Save as PDF

​

A step-by-step instruction guide to replacing the spout o-ring kit.
​ Preparation: 

 

clipboard_e81cbca6da3509e464548fa0904a76c73.png

1. Unscrew spout nut (#2) counter-clockwise.  1111111111111111111111111111111111 

        clipboard_ed72e9cd9086f3b00d9a6fd5814979669.png             

2. Pull spout assembly (#1) off of the valve body (#5). Remove black rubber O-ring (#4) and white nylon split washer (#3).

clipboard_e70fe853190156c983f6556a7dd175077.png

3. Lubricate the black rubber O-ring  (#4) with the silicone provided P/N:99915.

clipboard_ea7b87613a57def66aee6d229a1cbd681.png

4. Place the white nylon split washer (#3) in upper channel and the O-ring (#4) in the lower channel. 11

clipboard_eba96e3ecda8e685deab63462a2a4cc68.png

5. Insert the spout (#1) and push firmly until white nylon split washer (#3) hits against brass valve body (#5).

clipboard_e77da8123a97765356cc8bce96de18e66.png

6. Tighten the spout nut (#2) clockwise until tight.   11111111111111111111111111

clipboard_e6438d49cbccbd807854318302a3d64ca.png          

For additional information on Moen products visit solutions.moen.com and select the type of product you are repairing. The guide will contain repair details, troubleshooting and specific information on assembling handles associated with that style of product.

Still Not Finding What You're Looking For?

Contact Us or Call 1-800-BUY-MOEN           

Non US?  Moen Canada | Other International Sites