114299 Hose Kit Replacement

Last updated
Save as PDF

This article will provide step-by-step instructions for replacing this service kit.

Preparation: The water supply shut off valves must be turned off- see article How to Turn Off the Water Supply to the Faucet.

The 114299 hose kit connects at 3 locations using quick connects. All three locations will need to be disconnected for the hose kit to be removed from the valve.

Moen makes two basic versions of quick connects. One type is black with a white button(s) (Version 1) and the other is white with a black button(s) (Version 2). Version 1 and Version 2 are interchangeable. The specific style, length and number of buttons on the quick connect will vary by product design.

Version 1: Front

black quick connect front.png

Version 1: Back

black quick connect back.png

Removal:

Squeeze the white tabs (B) together and push the tabs in. This will cause the white tabs (B) to push back into the quick connect releasing the white button.

Installation:

Insert the faucet part into the end (A) of the quick connect. Press the white button (A) in to lock the faucet part in. Gently tug on the quick connect to verify it is secure.

Version 2: Front

white quick connect front.png

Version 2: Back

white quick connect back.png

Removal:

Press and hold the black button (B) while pulling the faucet part out of the quick connect.

Installation:

Slide the end of the quick connect (A) on to the faucet or part. There will be an audible click to let you know the faucet part is secure. To test this, gently tug on the quick connect.

For additional information on Moen products visit solutions.moen.com and select the type of product you are repairing. The guide will contain repair details, troubleshooting and specific information on assembling handles associated with that style of product.

Still Not Finding What You're Looking For?

Non US? Moen Canada | Other International Sites