143002 and 140709 White Adapter With White Cap

Last updated
Save as PDF

There are multiple handle mechanisms used on Roman Tub faucets. Confirming which one you are working with will require removing the handle and identifying your handle mechanism. If these requirements have not yet been confirmed, see Roman Tub Deck Mount: Lever or Roman Tub Deck Mount: Knob for details at solutions.moen.com.

Preparation:

The water supply shut off valves must be turned off- see article How to Turn Off the Water Supply to the Faucet.
Recommended Tools: Phillips Screwdriver
The following instructions assume the handle and associated handle pieces have been removed. For additional details, visit Roman Tub Deck Mount: Lever or Roman Tub Deck Mount: Knob and select the type you are repairing. The faucet guide will contain specific information on handle assemblies associated with that style of product.

Symbol Key Legend

	Unthreads
	Pulls Out

For disassembly, follow the number of the parts in order starting with the white plastic cap (#1). Note: Escutcheon Adjuster (#5) does not need to be removed unless it is damaged. This part can be threaded higher or lower in the valve body to accommodate the handle kit.

For re-assembly, follow the number of the parts in reverse order starting with the stem extension (#4). If needed, this stem extension (#4) can be trimmed.

Note: The Escutcheon Adjuster (#5) this part can be threaded higher or lower in the valve body to accommodate the handle kit.

For additional information on Roman Tub Fillers visit Roman Tub Deck Mount: Lever or Roman Tub Deck Mount: Knob. For information on other Moen products visit solutions.moen.com and select the type of product you are repairing. The guide will contain repair details, troubleshooting and specific information on assembling handles associated with that style of product.

Still Not Finding What You're Looking For?

Non US? Moen Canada | Other International Sites