Skip to main content
Moen Solutions

Enabling And Disabling Sensors (2015-Present)

  1. Last updated
  2. Save as PDF
The guide below will help you to disable and enable your MotionSense: Dual Sensor-Hands Free Faucet. It is for faucets using the all black control box  that has three hoses.

 

Faucet Sensors:

clipboard_eaefaa7ed6d21f04bd7313e22e6b02d30.png

Control Box:

clipboard_e0be0d157df76d59f9f39b9d5b98af72c.png

Upper Sensor-Wave your hand over the upper sensor to turn the water on. Wave your hand back over the upper sensor to turn the water off.

Front Sensor-Place an object in front of the sensor to turn the water on. Remove the object to turn the water off.

Lever Handle-Open and Close the lever handle to turn the water on and off

Disable:

1. With the handle in the on position (pulled out away from the faucet), hold your hands over both sensors for five (5) seconds.

2. The blue light on lower front sensor will blink once after five (5) seconds.

3. The lower front sensor is now deactivated. Turn the handle off (pressed in towards the faucet).

Enable:

1. With the handle in the on position (pulled out away from the faucet), hold your hands over both sensors for five (5) seconds.

2. The blue light on the lower front sensor will blink once after five (5) seconds.

3. The lower front sensor is now enabled. Turn the handle off (pressed in towards the faucet).

For a comprehensive faucet guide, visit solutions.moen.com and select the type of faucet you are repairing. The faucet guide will contain specific information associated with that style of product.  

Still Not Finding What You're Looking For?

Contact Us or Call 1-800-BUY-MOEN           

Non US?  Moen Canada | Other International Sites