Skip to main content
Moen Solutions

Enabling And Disabling Sensors (After 2018)

  1. Last updated
  2. Save as PDF
The guide below will help you to disable and enable your MotionSense: Wave-Single Sensor Hands Free Faucet. It is for faucets using the black and gray control box that  was  installed after 2018.

Faucet Sensor:

clipboard_e6faf3483cb55fcbb2790b3bd1bfc6234.png

Control Box:

clipboard_e513c971d1dbbc686215257f115ebf6c1.png

Side Sensor- Wave you hand in front of the side sensor to turn the water on. Wave your hand again to turn the water off.

Lever Handle-Open and Close the lever handle to turn the water on and off.

Disable:

1. With the handle in the off position (pressed in towards the faucet), hold your hand over the sensor.

2. Rotate the handle from hot to cold three times.

3. The water will stop flowing once the sensor is disabled.

Enable:

1. With the handle in the off position (pressed in towards the faucet), hold your hand over the sensor.

2. Rotate the handle from hot to cold three times.

3. The water will begin flowing once the sensor is enabled.

For a comprehensive faucet guide, visit solutions.moen.com and select the type of faucet you are repairing. The faucet guide will contain specific information associated with that style of product.  

Still Not Finding What You're Looking For?

Contact Us or Call 1-800-BUY-MOEN           

Non US?  Moen Canada | Other International Sites