Skip to main content
Moen Solutions

Free Standing Handle Assembly




Parts Legend:

A-Set Screw



D-Cartridge Escutcheon (Not Used on All Models)


  1. Using a 3/32" Hex wrench, loosen the set screw (A) until the handle (B) slides off. 
  2. Unthread the dome (C) counter-clockwise.
  3. Gently pry off the cartridge escutcheon (D).

To replace the cartridge see article Cartridge Replacement: 252005 Free Standing


  1. Snap the cartridge escutcheon (D) onto the assembly.
  2. Thread the dome (C) clockwise until tight.
  3. Position the handle (B) onto the assembly. Using a 3/32" Hex wrench, tighten the set screw (A).

For additional information on Free Standing Tub Fillers, visit  Roman Tub Filler: Free Standing Floor Mount at

Still Not Finding What You're Looking For?

Contact Us or Call 1-800-BUY-MOEN           

Non US?  Moen Canada | Other International Sites

  • Was this article helpful?