Skip to main content
Moen Solutions

How to Replace a Push Button Diverter

  1. Last updated
  2. Save as PDF

​

This guide will explain how to replace a push button diverter kit 1198 or 1394.
​ Preparation:
  • The water supply shut off valves must be turned off- see article How to Turn Off the Water Supply to the Faucet.
  • Recommended Tools: 7/8" Deep Well Socket or Pliers, Toothbrush, White Vinegar, Water
  • The following instructions assume the handle and associated handle pieces have been removed. For additional details, visit solutions.moen.com and select the type you are repairing. The faucet guide will contain specific information on handle assemblies associated with that style of product.
  • We recommend covering the drain before removing the handle so to not loose any parts down the drain.

     

Standard Valve

standard shower push button diverter.png

Moentrol Valve

Moentrol shower push button diverter.png

 

Disassembly:
  1. Place 7/8" deep well socket or pliers on the hex portion of the push button diverter (#1) and unthread counter-clockwise to remove.

 

Assembly:
  1. Clean the inside of the diverter valve (#2) with a toothbrush and a 50/50 solution of white vinegar and water.
  2. Place a 7/8" deep well socket or pliers on the hex portion of the push button diverter (#1) and thread it into the diverter valve (#2) clockwise to install.

For additional information on Moen products visit solutions.moen.com and select the type of faucet you are repairing. The faucet guide will contain repair details, troubleshooting and specific information on assembling handles associated with that style of product.

Still Not Finding What You're Looking For?

Contact Us or Call 1-800-BUY-MOEN           

Non US?  Moen Canada | Other International Sites  

  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Article type
    Topic
  2. Tags
    1. Shower Faucet-Parts Installation