Skip to main content
Moen Solutions

Removing a Pro Fit System

This article will give step by step instructions for removing and installing a Pro Fit system.

Preparation:

Disassembly:

  1. Insert a small flathead screwdriver into the opening on the base of the accessory you are removing.
  2. Pull the screwdriver away from the water to engage the tab inside the base of the accessory. This will release the product so that you can now pull it off the wall.

Assembly:

  1. Place the accessory over the mounting bracket lining up the hole in the base of the accessory with the tab on the mounting bracket.
  2. Push the accessory onto the mounting bracket.

For a comprehensive guide, visit solutions.moen.com and select the type of product you are repairing. The  guide will contain specific information associated with that style of product.


Still Not Finding What You're Looking For?

Contact Us or Call 1-800-BUY-MOEN           

Non US?  Moen Canada | Other International Sites

  • Was this article helpful?