Skip to main content
Moen Solutions

Two Handle 4" Centerset: Knob

2h centerset knob.png
Two Handle 4" Centerset: Knob
A Two Handle 4" Centerset Knob faucet will have a knob handle mounted on each side of the water spout.

Identify your Handle Style: Moen  produces a variety of Single Handle Standard faucets They are not assembled or repaired the same way. The articles below are listed based on the internal handle parts. To choose the correct articles you will want to identify your handle style.


Flat Cap: Prior To 2017

2h centerset knob flat cap.png

This faucet style handle will have a removable cap on top of the knob handle. The cap will have to be removed to verify there is a Phillips screw underneath. If there is not a Phillips screw, see Flat Cap: After 2017.

Flat Cap: After 2017

2h centerset knob flat cap.png

This faucet style handle will have a removable cap on top of the knob handle. The cap will have to be removed to verify there is not a Phillips screw underneath. If there is a Phillips screw, see Flat Cap: Prior To 2017.

Top Cap

2h centerset knob top cap.png

This style faucet has a cap on top of the handle however the handle is removed by unthreading the base while holding the knob stationary.

Threaded Cap

2h centerset knob threaded cap.png

This style faucet has a cap that is unthreaded from the top of the handle.

Threaded Hub

2h centerset knob threaded hub.png

This faucet style handle does not have a cap. It unthreads at the base while holding the knob stationary.

Recommended Articles

 Troubleshooting Faucet Symptoms: 

Handle Assembly:

Cartridge Replacement: 

Parts Installation:

97556 or 100561 Monticello Handle Adapter

Care and Maintenance: 


Still Not Finding What You're Looking For?

Contact Us or Call 1-800-BUY-MOEN           

Non US?  Moen Canada | Other International Sites  

 

  • Was this article helpful?